- Home
- System Center Configuration Manager 2007
- Step by step guide installing SCCM 2007 Part 11
- Home
- System Center Configuration Manager 2007
- Installation
- Step by step guide installing SCCM 2007 Part 11
- Home
- System Center Configuration Manager 2007
- Configuration
- Step by step guide installing SCCM 2007 Part 11
Step by step guide installing SCCM 2007 Part 11
- By Huzaifah Ahmad
- Published 12/27/2009
- System Center Configuration Manager 2007 , Installation , Configuration
-
Rating:
Step by step guide installing SCCM 2007 Part 11 we will configure DHCP server with relevant options required for SCCM. Thing to keep in mind is we have DHCP running on the Domain Controller & not the SCCM server.
Open DHCP MMC
Right click the Scope options > Configure Option 67 and point it to the boot location of where the SCCM files will be created & NOT the WDS boot files.
Configure Option 67 and point it to the SCCM server i.e. PILOT-SCCM-01
Review your settings.
Watch this space for Part 12
Good Luck !!!
Spread The Word
Article Series
This article is part 11 of a 14 part series. Other articles in this series are shown below:
-
Step by step guide installing SCCM 2007 Part 11
Related Articles
- Step by step guide installing SCCM 2007 Part 14
- Step by step guide installing SCCM 2007 Part 13
- Step by step guide installing SCCM 2007 Part 9
- Step by step guide installing SCCM 2007 Part 8
- Step by step guide installing SCCM 2007 Part 7
- Step by step guide installing SCCM 2007 Part 6
- Step by step guide installing SCCM 2007 Part 5
- Step by step guide installing SCCM 2007 Part 4
- Step by step guide installing SCCM 2007 Part 3
- Step by step guide installing SCCM 2007 Part 2
- Step by step guide installing SCCM 2007 Part 1
Comments
Comment #1 (Posted by anoop kumar)
Rating:
no poor not excellent
Comment #2 (Posted by lAMINE)
Rating:
Hi, thnx for sharing this useful information... my live environment is a bit similar to ur lab. so i hav d SCCM and WDS (2008) on one server and DC and DHCP on a another server (2003). do i really need to create this scope option on my DC? thanx for confirming.
Comment #3 (Posted by Julien.G)
Rating:
Hello,
I think the is a mistake here :
Configure Option 67 and point it to the SCCM server i.e. PILOT-SCCM-01
it should be :
Configure Option 66 and point it to the SCCM server i.e. PILOT-SCCM-01
Cheers.